Cost
What a Driveway Trench Drain Costs
The grate across the garage door is the part you see and the part people price. Where the collected water ends up is usually the bigger number, and it is the one missing from most first conversations.
A driveway that sends rain toward the garage gets the same suggestion from almost everyone: put a channel across the bottom. It is sound advice as far as it goes. The trouble is that a channel is a collector, not a solution, and its price tells you very little about what the whole job will cost until somebody has answered where the water is being taken.
This page puts published national numbers against each piece so that a quote can be read line by line. If a drive is being replaced anyway, the drainage belongs inside that pour rather than after it, and the place to start that conversation is our concrete driveway page.
What the national guides publish
Every figure below comes from HomeGuide's drainage and French drain cost guides, both revised in February 2026 and checked for this page in September. They are averages drawn from across the country. Nobody who would stand on your drive set them.
| Piece of the job | Published range |
|---|---|
| Channel drain across a driveway, fitted | $400 to $2,400 |
| Trench or channel drain, per running foot | $30 to $150 |
| Channel widths quoted | 4 to 8 inches |
| Plastic catch basin, material only | $20 to $130 each |
| Buried downspout line, per downspout | $150 to $350 |
| Simple downspout extension | $5 to $25 each |
| Grassed or stone swale, per running foot | $5 to $15 |
| Dry well | $50 to upward of $3,000 |
| Percolation test before a dry well | $600 to $2,000 |
| Regrading part of a yard | $500 to $5,000 |
Why the per-foot figure spans five times over
Thirty dollars a foot and a hundred and fifty are not two opinions about the same object. They describe different products, and three choices account for most of the gap.
What the channel is made of. The guide lists plastic, metal and concrete bodies. A polymer channel is light and quick to set; a cast or precast body is heavy, slower to bed and far more tolerant of a wheel landing on its edge.
What the grate is made of. Plastic, metal, fibreglass or concrete, according to the same source. On a driveway this is not a style choice. A grate specified for a garden path will crack under a car, and the replacement grate is rarely the cheap part of that repair.
How wide it is. Channels are quoted from four inches to eight. Wider holds more and costs more, and the right width is a function of how much paved area drains to it, which is exactly why nobody honest can size one over the phone.
The channel is the cheap half
Look back at the table and notice what is missing from the headline figure: any means of emptying the channel. The collector is priced; the destination is not. Where the water goes next decides whether the total lands near the bottom of that list or somewhere past the top of it.
Downhill to daylight. If ground falls away somewhere on the property, a solid pipe from the channel to that point is the simplest outlet there is. It costs trenching and pipe, and it keeps working with nobody attending to it.
A catch basin and a buried line. Where the route has to turn corners or run under lawn, a basin at the low point gathers the flow and traps debris before it reaches the pipe. The plastic box is inexpensive; the digging around it is not.
A dry well. For a lot with no lower ground to reach, a dry well lets the water soak away on site. Note the range, which runs from pocket change to thousands, and note the test that is supposed to come first. A percolation test can cost more than a small well, and skipping it on heavy ground is how a soakaway ends up full in April.
Retrofit or build it in
The published driveway range assumes a channel being fitted, but it cannot tell you whether that means a trench left open in fresh stone or a saw working through an existing slab. Those are very different days.
On a replacement, the channel is set on its bed, the forms are built to it, and the new concrete is finished to the grate so that the two meet flush. On an existing drive, a strip has to be cut out, the base under it excavated, the channel set, and new concrete placed on both sides against old. The result works, but it adds two fresh joints across the slab at the one place water is concentrated.
So if replacement is on the horizon anyway, putting drainage off until afterward is paying for the same concrete twice.
Cheaper moves worth pricing first
Not every wet garage threshold needs a channel. Before accepting one, price the smaller interventions from the same table, because on some lots they solve it outright.
- Move the roof water. A downspout emptying onto a drive adds the whole roof to that drive's catchment. An extension costs very little. A buried line to a bubbler outlet in the lawn costs more and is out of sight.
- Shape the ground beside the drive. A shallow swale along a side boundary can turn water before it ever reaches the paving.
- Fix the fall. Where a new slab is being poured, changing its shape can make interception unnecessary. That is a design matter, and our note on drives that fall toward the house works through it.
The local wrinkle: the street end
Where a discharge pipe would run toward the road, remember who owns that ground. In Burlington no curb and gutter, sidewalk or driveway approach may be built without a Department of Public Works permit, and anything that ties into a public storm system is a question for the City well before it is a line on anybody's quote. Our walk-through of what the city requires at the kerb covers the approach itself.
Winter adds its own consideration. A channel in permanent shade can hold ice long after the rest of the drive has cleared, so if the site offers any choice, position the grate where the sun reaches it.
What to ask for on the quote
- The channel and grate, by material and by load rating, not just by length.
- Where the outlet is, drawn on a sketch, and what it discharges into.
- Whether a percolation test is included if a dry well is proposed.
- Whether the price assumes a new pour or cutting into the existing slab.
- What happens to the roof water, stated separately.
A contractor who can answer all five has designed a drainage route. One who can answer only the first has priced a grate.
If the drive itself is due for replacement, the channel should be drawn into that plan from the start, and a concrete driveway estimate from us will price the two together.
Sources
- HomeGuide, drainage system installation cost - trench and channel drain rates per foot, the driveway channel range, channel widths and grate materials, catch basin, downspout line, extension, swale and regrading figures, and typical install time. Page modified 6 February 2026, read 24 September 2026.
- HomeGuide, French drain cost - dry well range and the cost of a percolation test beforehand. Page modified 5 February 2026, read 24 September 2026.
- City of Burlington Code, Ch. 274, Streets and Sidewalks - the Department of Public Works permit required for curb and gutter, sidewalk and driveway approach work. Read 24 September 2026.