Basics

A French Drain Beside the Driveway

Some driveways are ruined by rain landing on them. Others are ruined by water they never see, seeping sideways out of a higher lawn into the stone underneath. That second kind is what a French drain is for.

Picture a drive cut along the foot of a slope, or running beside a neighbour's lawn that sits a foot above it. After a heavy rain the surface drains well enough. But water that soaked into the high ground keeps moving downhill underground for hours, and the first open, porous layer it meets is the crushed stone under your concrete. Base that stays wet is base that pumps, softens and heaves when it freezes.

You cannot grade that problem away from the surface, because it is not happening at the surface. It has to be intercepted underground, on the uphill side, before it gets to the slab. A driveway replacement is the natural moment to do that, and a concrete driveway quote should hear about it before it is finalised.

How to tell which problem you have

CluePoints to
Puddles on top that drain once the rain stopsSurface shape; a grate or regrading question
Damp or dark concrete along one edge days after rainGroundwater arriving from the high side
Cracking and sinking concentrated along the uphill edgeBase softened by water from beside the slab
Soggy lawn strip right beside the drive, even in dry spellsSeepage from higher ground
Heaving along one side each winterWet base freezing; water is getting in from that side

Get a free on-site estimate

Surface problems belong to a different page; our note on channel drains across a drive covers the grate option. Everything below is about the underground kind.

What the drain is

A French drain is a trench with a pipe in it. The trench runs along the high side of the drive, typically lined with a filter fabric, then partly filled with clean gravel. A perforated pipe lies in the gravel with a steady fall toward an outlet, and more gravel covers it. Water moving through the soil reaches the trench, finds the gravel far easier to travel through than the ground around it, drops into the pipe and is carried off.

HomeGuide's February 2026 guide splits the shallow versions by depth. A surface-level drain sits less than two feet down; a curtain drain goes two feet or deeper and is the one built specifically to cut off water travelling underground. Beside a driveway, the trench has to reach below the base layer to do any good, which is why the depth conversation matters more than the length.

What it costs, nationally

The same guide prices both shallow types together at $10 to $35 per running foot installed, with surface-level drains at the lower end of the scale. It notes that trench excavation, which it puts at $500 to $1,200 on its own, is normally included in a French drain estimate rather than billed separately, and that a shallow drain in an easily reached yard needing no resloping can go in within a day. As ever, these are national averages. The number for your lot depends on length, depth, soil and the outlet.

That last item is the one to watch. A French drain is only as good as the place it empties. The guide lists the usual destinations: the street, some other drainage point well away from the house, a dry well, a sump basin or a storm drain. A drain with nowhere to go simply becomes a buried gravel bathtub right beside the base you were trying to protect.

Burlington and the outlet

City code touches two parts of this. The first is what the water is. Burlington's storm sewer ordinance says only stormwater may enter the municipal system, then exempts a list of clean discharges, and that list includes uncontaminated groundwater infiltration and foundation drains. Water collected by a curtain drain is exactly that kind of water, so what it carries is not the issue.

The second is where the pipe goes. The streets chapter forbids digging any hole, drain or ditch in a street, alley or other public ground without a permit, and forbids changing the grade of a sidewalk or street unless authorised. A drain that daylights in your own back lawn is a private matter. One whose outlet runs through the terrace to the curb needs the City involved before anybody picks up a shovel.

Order of work

If the drive is being replaced, the sequence practically writes itself:

  • Old concrete out. Tear-out exposes the edge, and a soft, wet base along the high side is visible evidence that the drain is needed.
  • Drain in. The trench, fabric, pipe and gravel go in along that side while the ground is open and machines are already on site.
  • Base rebuilt. Stone is laid and compacted against a trench that is already doing its job, so the new base starts dry.
  • Concrete poured. The new slab never has to meet the water that wore out the old one.

Reverse it and the drain becomes a separate project dug beside finished concrete, with the digger working inches from a new edge. It can be done. It is harder, and a slab edge undermined by that dig is a repair nobody wanted.

When it is the wrong fix

A French drain is not a cure-all. If the wet edge sits right under a downspout, move the downspout first and watch a season before digging anything. If no point on the lot is lower than the bottom of the trench, gravity has nowhere to send the water, and the drain will fill and stay full. And if the puddles are on top of the slab rather than seeping in from the side, the fix is the shape of the surface, not a pipe beside it.

Who does which part

Our crew pours concrete, and a French drain is drainage work, usually taken on by a landscape or drainage contractor. That division is normal and it works well, as long as both know about each other. Tell whoever quotes the drain when the concrete is booked, and tell whoever quotes the concrete where the drain will run, so the base and the edge forms account for it.

When the water question has an answer, the slab is the easy part. If you are ready to price the concrete side of the job, ask us for a concrete driveway estimate and mention the drain when you do.

Sources

  1. HomeGuide, French drain cost - per-foot range for shallow yard and curtain drains, the depth split between surface-level and curtain drains, excavation cost and its inclusion in estimates, installation time and the list of usual outlets. Page modified 5 February 2026, read 28 September 2026.
  2. City of Burlington Code, Ch. 271, Storm Sewer Illicit Discharge and Connection - s. 271-8, stormwater only, with exemptions including uncontaminated groundwater infiltration and foundation drains. Read 28 September 2026.
  3. City of Burlington Code, Ch. 274, Streets and Sidewalks - s. 274-11, no digging in or regrading of public ground without a permit. Read 28 September 2026.

Free Estimate

Get your free, on-site estimate.

Tell us about your project and we'll call you back the same day to set up a free measure and price.

Get your free quote

Tell us about your project and we will call you back the same day. No obligation.

What are you looking to do?
Roughly how big?
When are you thinking?

Pricing it out is fine. We will not chase you.

What is your ZIP code?

So we can confirm you are in the service area.

Where should we send it?

Free, no-pressure estimate · Serving Racine County, WI

By submitting, you agree to our Privacy Policy and Terms, and consent to be contacted by phone, text, or email about your project, including by automated means. Consent isn't a condition of purchase. Msg & data rates may apply.

Tap to Call - (262) 228-5293